TERMINAL EMULATION

EMULATION SELECTION

Upon connecting with a 3rd party client you will be prompted to select a terminal emulation mode. Choose the desired emulation by selecting the appropriate number. Be sure to set the 3rd party client emulation mode to the same emulation as the one selected on the server. The terminal emulation options available are:

·        DEC VT-100

·        DEC VT-220/320/420

·        SCO Console

·        AT386

·        Wyse 50

·        Wyse 60

·        IBM 3101

·        IBM 3151

·        AlphaCom - This is chosen when using the AlphaCommunicator Telnet Client.

Enter 0 for DEC VT-100 emulation, 1 for DEC VT-220/320/420, 2 for SCO Console emulation, 3 for AT386, 4 for Wyse 50, 5 for Wyse 60, 6 for IBM 3101,  7 for IBM 3151, 8 for Symbol 3 x 40 series, 9 for AlphaCom emulation.

If you do not want to be prompted for the emulation mode each time you log on using a 3^rd party client then you may set an environment variable on a per user basis using Logon Scripting .

The environment variable for the terminal emulation is:

            gwtn_term

For example to select SCO Console emulation you would enter:

            set gwtn_term=2

in the Logon Script for a particular user.

NOTE: No spaces are allowed when setting environment variables.

For example:

                        set gwtn_term=2 is correct

                        set gwtn_term = 2 is not correct

Send mail to webmaster@georgiasoftworks.com with questions or comments about this web site.
Copyright © 1997 - 2004 Georgia SoftWorks. All rights reserved.
Last modified: April 27, 2004